Topic: my computer that can do ai doesn't want to boot

Posted under General

it dudded out randomly and after i tried swapping the 2 sticks from the 4 slots it made a response of 1 long beep and two short beeps
i was playing puzzles and dragons (the game has some nice creatures) before it died (temporarily dead)
it was given to me by a friend which after i said i didn't want a ps5 for my birthday
how do i fix my computer

EMX

Member

Do you have a computer repair shop in your area?

igonge said:
it dudded out randomly and after i tried swapping the 2 sticks from the 4 slots it made a response of 1 long beep and two short beeps
i was playing puzzles and dragons (the game has some nice creatures) before it died (temporarily dead)
it was given to me by a friend which after i said i didn't want a ps5 for my birthday
how do i fix my computer

Sorry to hear that man. What you're hearing are called "beep codes" and they vary based on motherboard. Do you have a manual for the motherboard? If you know what motherboard it is you could look up the beep codes. Also if the motherboard is getting power it probably has a post code or Q-Code display that would show letters and numbers like "D6" , that's an error code and if you find it you can look that up too.

Safest option is to have a pro look at it, but that's probably going to cost you cash. Asked an AI for a list of steps to do and it gave me this:

1. Power down completely. Switch off the PSU, unplug the power cable, and hold the power button for around 10 seconds to discharge residual power.

2. Check the RAM. Remove both sticks and try booting with just one stick in the motherboard's recommended single-stick slot (usually A2). Try each stick individually, and then try another recommended slot.

3.Check the graphics card. If he has a dedicated GPU:

Remove and reseat it.

Check that its PCIe power connectors are fully seated.

Check that the monitor is plugged into the graphics card rather than the motherboard.

If his CPU has integrated graphics, try removing the GPU and connecting the monitor to the motherboard's video output.

4. Check the power connections. Make sure the 24-pin motherboard connector and 4/8-pin CPU power connector are seated properly.

5. Clear the CMOS. Follow the motherboard manual's instructions to reset BIOS settings.

6. Look for diagnostic indicators. Check for motherboard debug LEDs, a two-digit POST code display, or additional beep patterns.

The good news is if you're hearing beep codes hopefully the systems not fried or anything, best case scenario is you just have to reseat the RAM or GPU better. Just take it slow and be careful so nothing breaks.

emx said:
Do you have a computer repair shop in your area?

maybe
i know the pawn shop nearby but i don't know where the specific computer repair shop is
the closest to one i know of is probably for phones since it's a small section in the mini mall
it's an asus and i'm also going to get rid of the crappy monitor if i get a new one

igonge said:
it dudded out randomly and after i tried swapping the 2 sticks from the 4 slots it made a response of 1 long beep and two short beeps
i was playing puzzles and dragons (the game has some nice creatures) before it died (temporarily dead)
it was given to me by a friend which after i said i didn't want a ps5 for my birthday
how do i fix my computer

Keep in mind that if your memory is ddr5, it is possible that it'll need to train it's memory occasionally (especially after you remove and reinstall the sticks), which could take from a minute and to sometimes as long as 15, during which fans are spinning but it doesn't really react or show anything on screen. Although it shouldn't give multiple beeps if it's just training, that's likely a code for something being wrong, as already mentioned.

Also, before interactions with internal components don't forget to ground yourself and avoid static electricity producing surfaces, like rugs sweaters and stuff like that. But most importantly ground yourself by touching something large, metal and unpainted that is grounded (or, as AI tells me, your metal pc case while your psu switch is turned off, but it's cable connected to the wall (if outlets have ground in them)). And of course try not touching chips/component elements at all when you hold sticks or graphics card.

>needs training and stuff
shit it's sitting on the carpet and i didn't know you had to train it

igonge said:
>needs training and stuff
shit it's sitting on the carpet and i didn't know you had to train it

Well, it's not that 'you need to train it', but just when it needs training it does it automatically without telling you, which may cause panic in a person who doesn't know about it when their pc is turned on, but the screen is black and nothing is happening for minutes. Hell, i know what it is and it still makes me uneasy every time.

list

Member

igonge said:
it dudded out randomly and after i tried swapping the 2 sticks from the 4 slots it made a response of 1 long beep and two short beeps
i was playing puzzles and dragons (the game has some nice creatures) before it died (temporarily dead)
it was given to me by a friend which after i said i didn't want a ps5 for my birthday
how do i fix my computer

Google "your brand and model of computer beep codes" Beep codes aren't standardized. If it's a custom built you'll want to google "the model of your motherboard beep codes"

Enkin

Member

Many motherboards can spit out an error, prime b550m-a looks like it uses LEDs and sounds for error codes.
Check with your manual to determine where to find them and what to look for

igonge said:
it dudded out randomly and after i tried swapping the 2 sticks from the 4 slots it made a response of 1 long beep and two short beeps
i was playing puzzles and dragons (the game has some nice creatures) before it died (temporarily dead)
it was given to me by a friend which after i said i didn't want a ps5 for my birthday
how do i fix my computer

> 1 long, 2 short beeps
Per ASUS standards - Memory or video initialization issue. Reseat RAM sticks and check graphics output.

>the 2 sticks from the 4 slots

RAM. The word you are looking for is RAM.

Your first goal is to get it to post. That's when your mobo first boots up and you get your first video output from the computer. This is before storage comes into play at all.

The first thing you should do is drop down to a single stick of RAM. Try it in slot 2 (the one second closest to the motherboard -- usually). If it works, cool. If it doesn't, try it in slot 4 (the one furthest right). If it works, cool, but you should probably try again in slot 2 and make sure you seat it properly this time.

If it didn't work, try the other stick. Both slot 2, and and slot 4. The goal here is to isolate it to one of a few possibilities...

A - a memory stick went bad
B - a memory slot went bad
C - There's something else wrong

If neither stick gets things posting again, try removing the video card. Hopefully you have on-board video. Check the back of your computer to see if you have a place to plug an HDMI, display port, or DVI cable into and try that. If it still doesn't boot at this point the remaining options for diagnostics are not amateur friendly.

EDIT: it's fairly unlikely that you have integrated graphics on that machine. The motherboard itself doesn't have any and you'll only have it if it's provided by the processor. So unless your processor is specifically a Ryzen whose 4-digit number is followed by G (like Ryzen 5700G, 5600GT, or 4600GE -- something like that), you probably don't have integrated graphics at all and at that point taking out the video card is pointless unless you have another one to fall back on.

If you have another PSU, you might give that a shot after exhausting the memory swapping. If power delivery isn't working out for your GPU then that would also cause this post error.

Updated